SMPS battery chargers
5 A – 30 A
High-frequency switching, modular construction, hot-swappable rectifier modules. Roughly a third the footprint of an equivalent thyristor charger and around 92% efficient, with a controller that manages float, boost and battery health without intervention.
- 5 A – 30 A
- Rated capacity
- —
- Real output at 0.8 pf
- —
- Battery bus
- 1 phase
- Input supply
SMPS Battery Charger — rating card
| Output | 24 / 48 / 110 / 220 V DC |
|---|---|
| Current | 5 A – 30 A (modular) |
| Module rating | 5 A / 10 A hot-swap |
| Efficiency | > 92% |
| Redundancy | N+1, module fail does not drop output |
| Ripple | < 0.5% RMS |
| Controller | LCD, event log, RS-485 / SNMP optional |
Typical values for the standard build. Configured to order — your general arrangement drawing carries the figures that apply.
SMPS Battery Charger — questions
Anything not covered here, call us — most of it is faster to answer on the phone.
What happens if one SMPS module fails?
In an N+1 configuration the remaining modules pick up the load with no interruption and the controller raises an alarm. You swap the failed module live, without shutting the charger down.
Other capacities
Where we supply and attend
SMPS Battery Charger units are built at our Pune works and delivered, installed and commissioned across the city and the industrial belt around it.
Outside these areas we contract individually against distance, and we will tell you honestly if the response time you need is not one we can hold to. All areas served
Not sure this is the right size?
Send the load list. Sizing against inrush rather than running load is where most undersized installations go wrong, and it costs nothing to check.